Building your own home Solar Panel is possible, if you know how! Click Here For Videos and More Information! Although the manufacture of solar panels is done in a strict quality controlled environment, for personal purposes you can build your own home solar panel to see how the sun’s energy can be converted to electricity. you can build your own home solar panel by using copper - cuprous oxide, - which will transform light into electricity. You can use a thin sheet of copper to get your cuprous oxide.
Click Here For Solar Panel Videos and More Information on home Solar Panel building!
You will need about. To see the end result, You will need a voltmeter, a small machine that can detect a small amount of electricity. To build your own solar panel, the copper sheeting now needs to be heated on an electric stove or hot plate. It's as simple as putting the copper sheet on a burner. Turn it on high and let it heat up there for about 30 minutes. As it heats, you see the plate turn colors and the heat will show the outline of the heating coil underneath the plate. You will see that as it gets hotter it will begin to turn dark until the entire sheet has a black coating.
When the sheet is entirely black, you can turn off the burner and let it sit to cool for about 20 minutes. As it cools the black cuprous oxide coating will begin to pop off the sheet, leaving a thins coating of red on the copper. The red coating is needed to build your own solar panel. Most of the black can be rinsed off under running water, but it should not be brushed clean.
Salt Water actually Helps Produce The Electricity for your home solar panel. By using the alligator clips, connect the copper sheet to one the top of one side of the glass jar. Now it is time to attach another clean copper sheet to the other side of the jar. Mix abround 2 tablespoons of regular table salt into hot water, mix well - making sure it dissolves, cool, and then pour it into the jar. It's really important that the water does not get on the alligator clips. The two copper sheets should be under water with about one inch left exposed to build your own solar panel.
Now you are getting closer to your home solar panel. Carefully, carefully, place the entire item in the sun-light, that means either through the window or outside ,exposed to the sun. Using the voltmeter connect the leads to the two alligator and you can see the meter indicate the small amount of power being generated by sunlight, proving you were able to build your own home solar panel. Now, enjoy the sun's energy from your own home solar panel! You can feel proud!!! Click Here For Videos and More Information
No comments:
Post a Comment